欧美老熟妇xb水多毛多_狠狠色综合网站久久久久久久_欧美做真爱大HD高清_在线亚洲精品国产一区麻豆

Ju Qing clutch can appear some fault, sometimes in sealed, we have some questions need some attention, below is according to our practical experience summed up a few, Shared with everybody, today is the hope can bring you some help!

(1) remove the shaft to the transmission output flange and the shaft decomposition; Remove the transmission fixed bolt and remove the transmission car transmission jacking; Remove the clutch booster cylinder and rocker arm connecting fork; Remove the clutch shell fixed bolt, pull the gearbox and clutch, the transmission input shaft contact with clutch.

(2) to be removed from the flywheel clutch, carefully check the clutch cover and balance the gasket had been token, such as no mark, then began to remove the mark should be.

(3) the decomposition of the clutch, in order to prevent deformation of the clutch cover and parts pop-up, should be on the bench vice or proprietary tooling break down.

(4) the decomposition of the clutch before, should advance in clutch cover and make assembly mark in the pressure plate, in order to prevent the destroy the balance of the clutch itself.

(5) will be removed parts classification are arranged in a row, and clean, in order to prevent the disorder.

(6) check the separation bearing and separation sleeve, cleaning and lubrication.

(7) check the platen, should pay special attention to platen hub rivet and shock absorber of wear, such as damage to the platen assembly should be replaced.

(8) of the clutch assembly, should pay attention to order each other between parts, cannot be wrong. After the clutch pressure plate assembly, balancing the best testing.

(9) to determine the ministries, undoubtedly will install to the flywheel, clutch according to the loading sequence and remove the opposite.

The above content is about dismantling giant clutch note method, if you need any help, you can feel free to call our service hotline, we will serve you wholeheartedly!